Press Release Summary = Panaji - 13th Jun, 2007 - SYCODE today launched five new plug-ins for Rhinoceros.
\"These new plug-ins are part of our efforts to customize Rhinoceros in order to serve its customer base even better", explains Deelip Menezes, owner of SYCODE. "Some of our existing Rhino plug-ins did not have support for Rhino 4.0. This has changed. Today, we have added support for Rhino 4.0 for all our plug-ins. SYCODE is committed to providing its customers and all Rhino users the maximum possible flexibility when deciding which software they would like to use. As long as it is technically possible and feasible, SYCODE will design its Rhino plug-ins to work with Rhino 3.0 and later."
Press Release Body = The five new plug-ins are as follows:
(1) Mesh To Solid for Rhino: This plug-in gives Rhino the ability to convert a polygon mesh into a solid. It works better than Rhino\'s MeshToNurb command in the sense that the resulting solid is mode simplified. Mesh To Solid for Rhino is priced at 195 USD and can be downloaded from http://www.sycode.com/products/mesh_to_solid_rh/index.htm.
(2) NC Import for Rhino: This plug-in gives Rhino the ability to import a numeric control (NC) program file into Rhino. The plug-in reads the movement of the tool in the nc program and recreates the toolpath as a series of curves in the active Rhino drawing. NC Import for Rhino is priced at 195 USD and can be downloaded from http://www.sycode.com/products/nc_import_rh/index.htm.
(3) PIX Import for Rhino: This plug-in gives Rhino the ability to import a Dr. Picza (PIX) file into Rhino. The plug-in reads the scan data from a PIX file and recreates the nurbs surface or mesh in Rhino. PIX Import for Rhino is priced at 195 USD and can be downloaded from http://www.sycode.com/products/pix_import_rh/index.htm.
(4) PLT Import for Rhino: This plug-in gives Rhino the ability to import a HPGL Plot (PLT) file into Rhino. The plug-in reads pen movements in the PLT file and creates corresponding curves inside the Rhino drawing. PLT Import for Rhino is priced at 195 USD and can be downloaded from http://www.sycode.com/products/plt_import_rh/index.htm.
(5) PLT Export for Rhino: This plug-in gives Rhino the ability to export to a HPGL Plot (PLT) file. The plug-in reads curves in the active Rhino drawing and converts them to corresponding pen movements in a PLT file. PLT Export for Rhino is priced at 195 USD and can be downloaded from http://www.sycode.com/products/plt_export_rh/index.htm.
Additionally, MeshCAD for Rhino (http://www.sycode.com/products/meshcad_rh/index.htm), our mesh editing and modeling plug-in for Rhino has been updated to support Rhino 4.0.
Web Site = http://www.sycode.com
Contact Details = Company: SYCODE Address: S1/116, Nova Cidade Complex, NH 17, Alto Porvorim, Goa - 403521. India Email: info@sycode.com Phone: +91 9822689298 Fax: +91 832 2416615 Contact: Deelip Menezes
2022
